نأتى الى شرح ملف mbox.cfg
و هو ملف عملية التشغيل الذى يتم وضعه فى مكانه بالمسار
var/keys
و يقوم بنفس عمل ملف gbox.cfg مع الاختلاف فى المهام المجدولة و التى تختار انت منها ما يصلح لك
سنرى منها بعض النقاط الهامة
http://mbox.cfg EXPLANATION and EXAMPLES
كما نرى ان النقط مختلفة عن ملف gbox.cfg
فهنا يتم اعطائك صلاحيات اكبر لتعديل و اضافة ما تريده
D: { 0 }
//D: { x }
//x=0 -> disable
//x=1 -> enable dbox2 cw writing
//x=2 -> enable STAPI for IPBOX
//x=3 -> enable STAPI for Kathrein
//default disabled
B: { 0 }
//B: { x }
//x=0 -> disable local UDP ports 8004-80xx ,this ports are used with DVB cards and gbox plugin (Windows and Linux)
//x=1 -> enable
//default disabled
Z: { 12 } { 127.0.0.1 8000 }
// Z option -> control sending/writing current informations
// Z: { xy } { IP port }
// x=0 -> don't print time stamp (in console screen and in debug file)
// x=1 -> print time stamp ( .... )
// y=0 -> no writing/sending informations to debug file/destination IP
// y=1 -> send informations to destination IP but not in debug file
// y=2 -> write informations to debug file but don't send to destination IP
// y=3 -> write/send informations to debug file/destination IP
// IP port -> destination IP and UDP port where to send informations
// no default
#C: { 127.0.0.1 7999 }
// C option -> control receiving some command messages localy or from another IP
// C: { IP port }
// IP-> your local IP or you DNS
// port -> on what port you will be waiting command messages
// no default
U: { 1 }
هنا اختيار تحديث الايبى عند تغيره و ستلاحظوا عند التشغيل بالفعل ان الايمو يقوم بتحديث الايبى عند اى تغير فيه
// U options -> Update peer(s) IP if it changes while peer still resending ecm's/cw etc.. information
// default only on hello message peer(s) IP are updated !!!
// U: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
L: { 1 }
هنا نقطة هامة جدا و هى جديدة
يمكنك هنا من الحصول على كافة الكروت المرسلة بما فيها virtual cards
و يمكنك عزل هذا الاختيار ايضا
هنا بعد التجربة تم الحصول على عدد كبير من الكروت
فمثلا ان كان ملف الشير به 12 سطر
قد يصل عدد الكروت بعد فترة من الاتصال الى 2300 كارت او اكثر
// L option -> how mbox to menage virtual card(s) with level 0
// ( only for peer(s) who have and can reshare virtual cards but don't want to use LEVEL 0 card(s) for them self)
// L: { x }
// x=0 -> don't load any virtual cards with LEVEL 0, you can't use them for your self
// x=1 -> load all virtual cards with LEVEL 0 ,you will be using them for your self
// default 1
T: { /tmp/ }
هنا يمكنك التعديل و اختيار اماكن تخزين الملفات كمثال
// T option -> where to store temp files ... (share.info,debug.txt ,etc.)
// T: { folder_path_to_files, example: T: { /tmp/ } }
K: { /var/keys/ }
// K option -> where is cwshare.cfg file
// K: { folder_path_to_files, example: K: { /var/keys/ } }
E: { 1 }
هنا يمكنك الاختيار بين ان تحجب نفس من السطور جميعها بمعنى انه لو سطر اعطاك ايدى او كرت معين لا تأخذه من السطر الاخر
او انك تفعل الحصول على نفس الكروت من جميع الاسطر
// E option -> disable same cards from peers
// E: { x }
// x=0 -> use same cards(boxids) from peers
// x=1 -> don't use same cards(boxids) from peers
// default 1
M: { 1 }
// M option -> Mode option
// M: { x }
// x=0 -> local mode no NET
// x=1 -> NET mode
// default 0
P: { /tmp/pmt.tmp }
// P option -> PMT ******** (Dont used with linux and windows)
// you must be tuned to channel so image can generate this file
// { /tmp/pmt.tmp } for resivers and images that create this file <- use this if you can
// { 1/tmp/camd.socket } for enigma 1
// { 2/tmp/camd.socket } for enigma 2
W: { 0 }
// W option -> write raw ECM to ecm.raw file
// W: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
H: { 0 }
هنا يمكنك الاختيار اما ان يكون كارتك هو له الاولوية قبل كل الكروت او ان يكون النتوورك له الافضلية على كارتك
//H option -> C line priority over network cards
// H: { x }
// x=0 -> disabled -> newtwork cards has priority over your local cards
// x=1 -> enabled -> your local cards has priority over network cards
// default disabled
[/code]
الان نأتى الى الاتى
اليكم صورة من عملية التشغيل التى تمت بنجاح و تلاحظوا ان هذه العملية تشبه الى حد كبير ما يقوم به الجى بوكس مع الاضافات الجديدة التى استحدثها هذا الايمو الجديد من اضافة النيوكام الى ملف الشير و اتصاله السريع
[09:02:09] Starting MBOX version 0.2 BETA coded by The_Ripper ()
[09:02:09] ===> Net Mode <===
[09:02:09] Reading cwshare.cfg ...
[09:02:09] Trying to get online,please wait ...
[09:02:09] My IP 192.168.xxx.xx1 ID 342D (192.168.xxx.xx1) pass xxxxxxxx,
كما نلاحظ هنا انه تم الاتصال بسيرفرات النيوكام و التى يمثلها السطر C بملف الشير
we are ONLINE
[09:02:09] IP 192.168.xxx.xx0 Port 5555-5555 ID AAAA pass xxxxxxxx sharelevel 03/03 (192.168.xxx.xx0)
[09:02:09] Total 1 UDP port(s) to monitor
[09:02:09] Total 0 TCP port(s) to monitor
[09:02:09] Monitoring port(s): 5555
[09:02:09] Total 2 newcamd server(s) to connect
[09:02:09] Creating newcamd worker thread ...OK
[09:02:09] Creating send thread ...OK
[09:02:09] Creating UDP receive thread for 5555 port ...OK
[09:02:09] [newcamd] Trying to connect to newcamd server (192.168.xxx.xx0:5555)
.
OK
[09:02:09] [newcamd] Trying to connect to newcamd server (192.168.xxx.xx0:5555)
[09:02:09] [newcamd] Connected to (192.168.xxx.xx0:5555) ...
[09:02:09] [newcamd] Got card with CaID 0x0604 and 4 number(s) of ProvID (192.168.xxx.xx0:5555)
[09:02:09] [newcamd] Card: CaID 0x0604 ProvID: 0x000000 (192.168.xxx.xx0:5555)
[09:02:09] [newcamd] Card: CaID 0x0604 ProvID: 0x000001 (192.168.xxx.xx0:5555)
[09:02:09] [newcamd] Card: CaID 0x0604 ProvID: 0x000002 (192.168.xxx.xx0:5555)
[09:02:09] [newcamd] Card: CaID 0x1702 ProvID: 0x000003 (192.168.xxx.xx0:5555)
[09:02:09] [newcamd] Creating newcamd worker thread for (192.168.xxx.xx0:5555) ...
OK
هنا يلاحظ الاتصال بسطور التبادل كما يحدث فى الجى بوكس
[09:02:17] ->Hello to peer (192.168.xxx.xx0:5555)
[09:02:18] <-Hello from peer 192.168.xxx.xx0 port 5555
[09:02:18] <=Hello from peer 192.168.xxx.xx0 port 5555
[09:02:18] ->Hello to peer (192.168.xxx.xx0:5555)
بالمرفقات ستجدوا الايمو + برنامج المتابعة يستخدم على الكمبيوتر و هو احدث اصدار
كما انه تم تشغيل هذا الايمو على وندوز و ايضا اللينوكس
هنا سنتحدث عن طريقة عمل الايمو على الدريم بوكس و الريلوك و غيره من الاجهزة التى تماثلها
اولا فك ضغط الملف و قم بنقل الملف mbox.cfg الى المسار var/keys
و اعطيه التصريح 644
ثانيا انقل ملف cwshare.cfg نفس الملف المستخدم مع الجى بوكس الى نفس المسار
ثالثا انقل ملف mbox الى المسار var/bin مع اعطائه تصريح 755
الان تم تجهيز عمل الايمو
لتشغيل الايمو هناك طريقة يدوية كما يلى
افتح برنامج dcc و اتصل بالجهاز
ثم على الشمال اضغط على telnet
اكتب الامر التالى
cd /var/bin